![]() |
| IPC-BA35 3.5" NS Geode GX1 Board w/CPU/VGA/2-LAN/Audio |
|
![]()
| CPU Type | Onboard NS Geode GX1 300MHz low power processor |
| Chipset | NS CX5530A |
| I/O Chipset | Winbond W83977F-A |
| Memory | One 144-pin SODIMM socket supports up to 256MB SDRAM |
| Enhanced IDE | Supports two IDE devices (ultra DMA/33) |
| FDD Interface | Supports up to two floppy drives, 1.44 and 2.88MB |
| Parallel Port | One internal header for bi-directional parallel, supports SPP, ECP and EPP modes |
| Serial Port | Three RS-232 and one RS-232/422/485 |
| IR Interface | Supports one IrDA Tx/Rx header |
| KB/Mouse connector | External mini-DIN PS/2 KB/Mouse connector |
| USB: Connector | Supports dual USB ports |
| Watchdog Timer | Support software selectable timeout interval |
| Power Management | I/O peripheral devices support power saving and doze/standby/suspend modes, APM 1.2 compliant |
| VGA/LCD | NS CX5530A, share system memory 1 - 4MB, support CRT and LCD |
| Audio | AC'97 Codec |
| LAN | Dual Intel 82559ER or Realtek RTL8139C (option), PCI 100/10 Mbps Ethernet controller |
| SSD | One CF+ socket support Type I/II Compact Flash memory devices |
| BUS Interface | One PC/104 |
| Power Connector | 4-pin HDD type |
| Power Supply Voltage | +5V (4.74V to 5.25V) maximum power requirement 2A @ 5V |
| Operating Temperature | 32 to 140°F (0 to 60ºC) |
| Dimensions | 145mm x 102mm (3.5" FDD-size) |